Husqvarna 536LiHE3 Workshop Manual page 24

8.1 Dismantling the throttle trigger lock
and throttle trigger
1
Dismantle the control handle as described in
"7 Basic dismantle/assembly".
2
Lift off the throttle trigger lock and the throttle trig-
ger from their attachments in the handle.
Cleaning and inspection
• Clean and check all parts thoroughly. Parts must
be replaced if cracked or showing signs of other
defects. Always use original spare parts.
• Check that the spring blade is intact and retains
all its tension.
8.2 Assembling the throttle trigger lock
and throttle trigger
1
Assemble the throttle and throttle lockout on their
respective attachments on the handle. Make sure
that the spring blade comes under the keypad.
2
Assemble the control handle as described in "7 Ba-
sic dismantle/assembly".
8 Safety Equipment
Safety equipment
English – 24