Dismantling The Control Unit - Husqvarna 536LiHE3 Workshop Manual

Repair Instructions

9.17 Dismantling the control unit

NB! Use the CST to check the functions before
dismantling.
1
Dismantle the battery housing as described in "6
Basic dismantle/assembly" on page 16.
2
Disconnect the connector to the motor.
Loosen the screws (G) to the control unit and the
screws (H) to the battery contact and lift out the
entire unit and the fan.
3
Unplug connector (D) for the keypad, main switch
and the fan.
Cleaning and inspection
Clean and inspect all parts of the control unit. The
control unit must always be replaced with a new
one if cracked or showing signs of other defects.
Always use original spare parts.
44 – English
Fig 68
D
S/N: -20180400173
D
S/N: 20180400173-
G
H
H
G