Husqvarna 536LiHE3 Workshop Manual page 21

The steps described below are the basic steps that must be carried out before any other service or repair
work or final assembly is possible.
7.1 Battery
Press in the catches and remove the battery.
Replace the battery once assembly has been
completed.
WARNING!
The battery must always be re-
moved for service/repair work and
may only be replaced once the
pole hedge trimmer has been fully
assembled again!
NOTE!
Note how wires, components, etc., are posi-
tioned before dismantling.
Make sure to position them correctly to avoid
pinching when the pole hedge trimmer is re-
assembled.
7.2 Trigger guard
Remove the screws and push the guard forward.
7.3 Battery housing skidplate
Undo the screws and remove the skidplate from
the battery housing.
Assemble in the reverse order.
7 Basic Dismantle/Assembly
Basic dismantle/assembly
1
2
1
English – 21