Husqvarna 536LiHE3 Workshop Manual page 47

Repair Instructions
9.18 Assembling the battery connector
Caution: The pin in the connector of the communica-
tion cable is loose and can fall out.
1
Push the communication cable connector into the
plastic housing, if the battery connector has a commu-
nication cable.
Caution: Make sure the pin in the communication
cable connector is in the correct position (A). The
product cannot send information to the common
service tool, if the pin is missing or in the incorrect
position.
A
2
Put the battery connector with the red wire into the
positive side of the plastic housing. Align the holes for
the pins.
3
Put the battery connector with the black wire into the
negative side of the plastic housing. Align the holes
for the pins.
4
Push the pins into the holes through the housing and
the connectors.
Caution: Make sure that the holes in the connections
align with the holes in the housing before you push in
the pins.
English – 47