Husqvarna 536LiHE3 Workshop Manual page 38

For products with S/N: 20180400173- (LiHE3).
1
Dismantle the control handle as described in
"6 Basic dismantle/assembly" on page 16.
2
Dismantle the throttle trigger lock and throttle trig-
ger as described in "7.1 Dismantling the throttle
trigger lock and throttle trigger" on page 18.
3
Lift out the main switch and disconnect cable (A).
4
To disconnect the cable (A), free the catch (D) with
a small screwdriver and pull the contact (C) out..
NB! Do not pull on the wires. Hold the contact
only when you pull it out.
9.12 Cleaning and inspection of the
main switch
Clean and check the main switch. The main switch
must always be replaced with a new one if cracked
or showing signs of other defects.
Always use original spare parts.
For products with S/N: -20180400173 (LiHE3).
For products with S/N: 20180400173- (LiHE3).
38 – English
C
S/N: –20180400173
S/N: 20180400173–
Repair instructions
A
D