Servomotor - ProMinent DULCOMETER D1CA Operating Instructions Manual

Complete Operating Menu / Description

Servomotor

Activation of the servomotor must be carried out with the same meticulous care as taken when calibrating
a measuring probe. The operating range is defined by the total resistance range of the feedback
potentiometer. The maximum limit of the range actually used is set by defining the control range.
CAUTION
To ensure correct operation, the activation time of the actuator used should not be less than
25 seconds for the control range from 0...100 %!
Access to all setting menus can be blocked with an access code !
Only with servomotor
servomotor
setting ?
Servomotor
Control direction
Control range
servomotor
setting
current position:
servomotor
OK
current position:
Possible values
Initial value Increment
Setting Setting
Chlorite Chlorite
De-Clt
100 % 1 %
servomotor
open ?
servomotor
close ?
dosing:
control range:
0 % to
operating range
Lower value
ok
off
10 %
servomotor
open
please wait !
servomotor
opened !
value take over ?
servomotor
close
please wait !
servomotor
closed !
value take over ?
chlorit
100 %
= automatic timing
Upper value
100 %
D1C2-Clt-025-GB
Remarks
in % of
operating range
19