Table of Contents
Advertisement
2.0
INSTALLATION
2.1
Unpacking
NOTICE
The Liebert MBSM should be unpacked where it will be installed. Leaving the packaging intact protects
the Liebert MBSM during transportation.
To unpack the Liebert MBSM:
1.
Check the Liebert MBSM for damage and, if any is found, inform the shipper and. if necessary, your Vertiv
agent.
2. Check the nameplate on the Liebert MBSM against the delivery papers and the bill of lading to determine
whether all ordered parts were delivered.
3.
Loosen the fastening screws on the pallet.
4. Lift the Liebert MBSM from the pallet.
5.
Keep the pallet for repackaging or transportation; dispose of the remaining packaging material in
accordance with local regulations
2.2
Transporting Without Packaging Materials
The cabinets can easily be moved to their final destinations with lifting devices.
WARNING
Irregularities in the floor can block the fork lift or cause the Liebert MBSM to bounce off the
forks. Moving the cabinets too quickly can damage them, causing them to fall over and
injure personnel.
WARNING
Whenever the devices are moved they must be secured against sideways tipping.
2.3
Equipment Delivery and Storage
WARNING
Pay attention to the markings indicating the center of gravity of the device. Use suitable
means of transportation and secure the UPS against tipping over when transporting.
Improper transportation can result in damage to the UPS and battery cabinet as well as
injury to personnel.
The Liebert MBSM is shipped on a pallet measuring 31.5" x 47.25" x 7.87"
(800mm x 1200mm x 200mm), and secured by four bolts inserted through its mounting
brackets. It is wrapped in protective plastic sheeting and supported by protective brackets. The
crated Liebert MBSM measures 31.5" x 47.25" x 19.68" (800mm x 1200mm x 500mm and weighs
145.5 lb. (66kg).
™
®
Vertiv
| Liebert
MBSM
™
User Manual |
6
Hide quick links:
Advertisement
Table of Contents
