This simple, dynamic display speeds operator response to changing power input and demand. Many of the settings will depend on the UPS type and features. Many settings will be made by Vertiv personnel when setting up the UPS.
Administrator, the control panel opens at the Operator level. To set or change a PIN, refer to 3.1 - Log In to the Touchscreen Control Panel. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Default opening screen; PIN required; Note that the SETUP Function Menu is absent. Operator level access for all with physical access to UPS. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Status Gauge is showing) Figure 4 Control display by access level—if PIN’s are required Observer Level Operator Level Administrator Level Service Level ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 11
Function Menu icons are orange and white when selected, except the LIFE Services icon; it remains dark gray with green text, if LIVE Services is activated. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
(see Figure 5). Touching a Context Menu item will reveal data or expand the menu to show additional options. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 13
• Technical Support: Manufacturer’s support: Web site, e-mail address and telephone numbers • About: Information about the UPS and its software and firmware; UPS model, rating, configured capacity, model number and serial number ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
The animated mimic display can be changed to any of five other views: Status, Alarms, Run Hours, Event Log and Battery Cycle Monitor Summary (see 2.4 - Customizing the Display). ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Close button or by touching any detail icon. The read-only information is available to all access levels (see Figures 9 through 13). ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Touch Close or the Load icon to close the Load detail pane and return to the animated mimic. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Touch Close or the Bypass icon to close the Bypass detail pane and return to the animated mimic. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Touch Close or the Environmental icon to close the Environmental detail pane and return to the animated mimic. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Repeat for each panel. 12. Touch the button to keep the changes or touch the button to exit the screen Save Cancel without saving. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
To choose an existing layout, navigate to the PANEL CONTENT screen and touch the radio button beside the layout, then touch the STATUS Function Menu. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Edit UNIT STATUS panel Touch the X on a parameter or the X on the Status Gauge to remove it from the view. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Edit Mode will deactivate after some changes. If all changes have been made and Edit Mode is active, touch the panel’s header area to exit Edit Mode. Figure 17 Change panel content Touch the Change content button to display the choices. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
+ icon at the right side of the panel to add a parameter icon. Touch the header area or a non-interactive area of the panel to deactivate edit mode. Add Parameter Icon ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Status Indicator Brightness: The default setting is 80 percent; brightness may be changed in increments of 20 percent from the low of 20 percent to 100 percent. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Make any other changes on the DATE & TIME page. Touch the button to make the changes or touch to exit without saving the changes. Save Cancel ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Touching the Graphic/Display icon permits changing the date by scrolling though months, days and years. Figure 22 Change the date Graphic Touching Date this icon ... Display reveals the text display of the date. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
These formats may be changed by any user, including an Observer, by going to Status>Display Options>Formats; choose the format or measurement system and touch Save. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Use the on-screen keyboard to enter the label name. Touch the Enter key. Touch Save to make the change or touch to exit without saving. Cancel ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
MOB - Module Output Breaker MainsFailure Manufacturer Measurement System Minimum Cell Voltage Model Model Number Model Type Module Number Monitoring Contact Network Time Protocol Nominal Cell Voltage ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Unit Name Unit Version Warning Temperature Limit Warning Type WebSite Contact — Figure 26 Custom Labels for Network Interfaces Network Interfaces - Custom Labels ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
NOTE Vertiv recommends recording any PIN’s set and storing the numbers where they are accessible if they are forgotten. A user with authority to change a PIN will be able to see PIN’s of those with equal or lesser access.
The OPERATE Context Menu also permits configure LIFE Services. Enabling LIFE Services requires a contract with Vertiv and on-site activation by Vertiv Services. The LIFE Support group is reachable by the telephone number on the dialog that opens at STATUS>LIFE Services>Support or by touching the LIFE Services icon (see ™...
This command is also available at STATUS>Alarms. That screen permits silencing one or more alarms, acknowledging an alarm and viewing either all alarms or just active alarms. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Figure 31 Inverter On command, parallel UPS configuration Press either the System or Single button to start the desired number of inverters. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Faults may be reset with the Reset button (see Figure 29 for the button’s location). Performing this function requires Operator or higher access, if PIN’s are required. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Intelligent Parallel rotates units into and out of service, equalizing run time, so that each unit’s service life will be the same. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Touch the SETUP Function Menu, touch the Context Menu and select UPS Settings. Enable or disable the Audible Alarm by touching the lighter associated box. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
The Context Menu on the OPERATE Function Menu permits initializing LIFE Services. Enabling LIFE Services requires a maintenance contract, and the service must be enabled and configured by Vertiv Services. LIFE Services provides increased up-time and operational efficiency through continuous monitoring, expert analysis and proactive response.
Voltage status for each phase, input, output and bypass Battery charge level (also shown in green graph line) ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
The DIAL CONTROL SETUP pane may be also be accessed by touching the Status Gauge and holding it for about 2 seconds. This requires Administrator or Service access. Figure 39 Access Status Gauge settings ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
A parameter must be visible on the UNIT STATUS screen for details to be viewed. For instance, if the UNIT STATUS pane does not show the Environmental icon, details about Environmental cannot be viewed. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Synchronization Angle Total Load Percentage B — — — Load Percentage C — — — Load Percentage Total Frequency Total Overload Remaining — ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Real Power B Apparent Power B Voltage (C-A) Current C Real Power C Apparent Power C — — Real Power Total Apparent Power Total ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Apparent Power A PF A Real Power B Apparent Power B PF B Real Power C Apparent Power C PF C Real Power Apparent Power ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Here, BATTERY has been expanded to show overall data and information for Cabinet 1. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Data in the columns in the graphic view is visible in the text view by expanding the parameter. Here, ENVIRONMENTAL has been expanded. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Touching Events opens the list of events and alarms; touching Logs permits viewing the Audit Log or the UPS Event Log. Figure 46 View alarms, events, log-out times Touch Events or Logs ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
• If sorting by Description, the list then sorts by Date/Time • If sorting by Event ID, the list then sorts by Date/Time. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Choose the file’s destination; here it is an SD card on the Customer Connections. Choose the file’s format, XML or comma-separated. Touch Save. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Component status—STATUS Menu Main Input is selected, so the COMPONENT DETAILS pane shows data about the Main Input. Figure 50 UNIT STATUS—Main Input details ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Liebert EXL S1. Scrolling is required to see all faults on some screens. Figure 51 UNIT STATUS details Bypass Details Bypass Input Details Load Details Battery Details Charger/Booster Details Inverter Details Rectifier Details ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
There are X minutes of calculated LOAD ON BATTERY X MINUTES REMAINING — run time remaining. The precedes the battery low voltage warning. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
VIEW EVENT LOG The module is operating in warning mode. The load is not LOAD OFF WARNING FOR DETAILS supplied, and has an active warning. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
The system is in critical operating mode, supplied by the FAULT ACTIVE - LOAD ON BYPASS SERVICE MODE ACTIVE bypass, running in a system service mode, and has an CRITICAL active fault. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 57
FAULT ACTIVE – CRITICAL supplied by other UPS modules. There is a critical fault in FOR DETAILS the system that the user needs to check. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Bypass reference failure notification without any delay. The internal bypass is disabled; the UPS is using the Bypass Status Bypass is Centralized 01-041 centralized / common (MSS) bypass. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 59
Status Inverter on rectifier 00-009 Inverter is supplied by the rectifier. General Status Inverter on battery 00-010 Inverter is supplied by the battery. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Set when at least one non-blocking fault is present on Status MUN has a fault 08-001 MUN. (MUN is Managed Ups Network, a controller component.) ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Set when input current reaches the limit defined by Rectifier Status Rectifier Current Limit 02-049 P 1740.11 and lasts more 3 ms but less 10 ms. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
DC link higher than ([SQRT2 * Phase voltage RMS] - 30V), delay 0.4 seconds). Bypass Alarm Bypass overtemperature 21-017 Set when inverter temp. P 151.01 < T < P 151.02. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 64
Communication Loss MI-B Ph. U-A 20-206 — General Alarm Communication Loss MI-B Ph. V-B 20-207 — General Alarm Communication Loss MI-B Ph. W-C 20-208 — ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 65
Status UPS Model detection in progress 08-003 MUN is searching for model information Status MUN initialisation done 08-004 MUN is setup with autodetection. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 66
P 1740.11 and lasts more 3 ms but less 10 ms. Rectifier Status Rectifier Non-Blocking Fault 02-050 Set when a non-blocking fault in rectifier stage is set. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 67
Overtemperature B Phase W-C 22-075 setting (Def = 80°C). Set when the rectifier detects DC bus voltage above Rectifier Alarm DC Overvoltage 22-102 threshold P1753.29. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Negative line buck booster fuse is blown. Charger/Booster Fault Fuse Blown Module B Pos Pole 33-078 Positive B line buck booster fuse blown. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 69
P107.1 + P118.0 + P105.0) Inverter Fault Output out of tolerance 36-048 • output voltage fast is above V Nominal + (P106.2 + P118.8 + P105.0) ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 70
Phase W is open. Inverter Fault Overtemperature 36-125 Inverter B overtemperature fault Phase U-A Inverter Fault Overtemperature 36-126 Inverter B overtemperature fault Phase V-B ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 71
Rectifier temperature sensor fault SW detected; based on M.I. Rectifier Fault Temp Probe Broken Phase U-A 32-064 value outside sensor limit interval -15°C < T< +150°C for 60 seconds (P 1780.6). ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 72
Inverter filter overtemperature. Any of the Thermal Switch Rectifier Fault Overtemperature Choke B Ph. W-C 32-090 “ALA” (M.I. XP31 pin 1-6) is active. ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 73
Notes ™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 74
™ ™ Vertiv | Liebert® EXL S1 Touchscreen Control User Manual | Rev. 1 | 12/2017 |...
Page 75
TECHNICAL SUPPORT / SERVICE Web Site www.vertivco.com Monitoring liebert.monitoring@vertivco.com 800-222-5877 Outside North America: +00800 1155 4499 Three-Phase UPS & Power Systems 800-543-2378 Outside North America: 614-841-6598 LOCATIONS United States 1050 Dearborn Drive P.O. Box 29186 Columbus, OH 43229 Europe Via Leonardo Da Vinci 8 Zona Industriale Tognana 35028 Piove Di Sacco (PD) Italy +39 049 9719 111...
Page 76
VertivCo.com | Vertiv Headquarters 1050 Dearborn Drive, Columbus, OH, 43085, USA Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners.