Isis Csnp-Interval; Isis Hello-Interval - Zte ZXR10 8900 Series Command Reference Manual

All manuals and user guides at all-guides.com

isis csnp-interval

Use this command to set the time interval of sending complete
Purpose
serial number packets. Restore default with the no form of this
command.
Interface configuration
Command Modes
isis csnp-interval <interval>[level-1 | level-2]
Syntax
no isis csnp-interval [level-1 | level-2]
Syntax
Description
<interval>
level-1
level-2
If level-1 or level-2 is not specified, this command acts at level-1
Defaults
and level-2 at the same time.
This example sets the time interval of transmitting complete serial
Example
number packets.
ZXR10(config)#interface fei_1/1
ZXR10(config-intf)#isis csnp-interval 5
ZXR10(config-intf)#isis csnp-interval 5 level-1
ZXR10(config-intf)#isis csnp-interval 5 level-2

isis hello-interval

Use this command to specify the time interval of sending IS-IS
Purpose
hello PDUs of the interface. Restore default with the no form of
this command.
Interface configuration
Command Modes
isis hello-interval <interval>[level-1 | level-2]
Syntax
no isis hello-interval [level-1 | level-2]
Syntax
Description
<interval>
level-1
level-2
If level-1 or level-2 is not specified, this command will act at both
Defaults
level-1 and level-2 at the same time.
�
Instructions
�
Time interval. unit: second, range: 1~65535,
default: 10 seconds; 3600 seconds on the
point-to-point link
Routers are in area Level-1
Routers are in area Level-2
Time interval, unit: second, range: 1~65535,
default: 10 seconds
Routers are in area Level-1
Routers are in area Level-2
If the router is a DIS, it sends hello packets every 3 seconds
regardless of the configuration.
The parameter of level is not valid on point-to-point mode sim-
ulated by LAN.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 IS-IS Protocol
107