Passive-Interface; Redistribute - Zte ZXR10 8900 Series Command Reference Manual

All manuals and user guides at all-guides.com
ZXR10 8900 Series Command Reference (IP Routing Volume I)

passive-interface

Use this command to configure an interface as a passive interface.
Purpose
After that, the interface cannot send Hello packets, receive any
IS-IS packet or establish adjacent relationship with other routers.
Router configuration
Command Modes
passive-interface {default |<interface-name>}
Syntax
no passive-interface {default |<interface-name>}
Syntax
Description
default
<interface-name>
The interfaces are passive ones by default.
Defaults
If there is an interface which is the only one starting IS-IS, it can
Instructions
be configured as passive-interface mode.
This example prevents routes from updating on interface fei_1/1.
Example
ZXR10(config)#router isis
ZXR10(config-router)#passive-interface fei_1/1

redistribute

Use this command to configure the filtering policy for other proto-
Purpose
col advertising routes to IS-IS. Cancel the redistribution with the
no form of this command.
Router configuration
Command Modes

redistribute

Syntax
<metric-value>][metric-type <type>][route-map <map-tag>]
no redistribute <protocol>
Syntax
Description
<protocol>
level-1
level-1-2
level-2
metric <metric-val
ue>
metric-type <type>
route-map
<map-tag>
118 Confidential and Proprietary Information of ZTE CORPORATION
Configures all the interfaces as passive
interfaces
Interface name
<protocol>[level-1|level-1-2|level-2][metric
The specified route source, it can be connect,
static, rip, ospf, or bgp.
The router is in area level-1
The router is in area level-1-2
The router is in area level-2
Metric value of redistributed routes, range:
0~4261412864.
Metric type of redistributed routes, external
or internal, default: internal
Name of route map redistributed by current
protocol1~16 characters