Zte ZXR10 8900 Series Command Reference Manual page 80

All manuals and user guides at all-guides.com
ZXR10 8900 Series Command Reference (IP Routing Volume I)
redistribute <protocol>[as <as-number>][peer <peer-address
Syntax
>][tag <tag-value>][metric <metric-value>][metric-type <typ
e>][route-map <map-tag>
no redistribute <protocol>[as <as-number>][peer <peer-addr
ess>][tag][metric][metric-type][route-map]
Syntax
Description
<protocol>
as <as-number>
peer <peer-address>
tag <tag-value>
metric <metric-val
ue>
metric-type <type>
route-map
<map-tag>
Routes of other protocol are not imported into the OSPF au-
Defaults
tonomous system.
By default, the metric is 1 when the BGP route is redistributed.
And the metric is 20 for other routes.
1. This command is supported after the platform version 4.6.02.
Instructions
2. The no redistribute <protocol> command removes the redis-
3. The no redistribute <protocol> tag command restores the
4. The no redistribute <protocol> metric command restores
5. The no redistribute <protocol> metric-type command re-
6. The no redistribute <protocol> route-map command can-
7. During the process of the redistribution of isis, if there has
8.
70 Confidential and Proprietary Information of ZTE CORPORATION
Filtering based on protocol, value: connected,
static, RIP, BGP-ext, BGP-int, ISIS-1,
ISIS-1-2, and ISIS-2
If the protocol is BGP-ext, there can be two
additional conditions: <as-number> and
<peer-address>. <as-number> is the AS
number of the peer, rang: 1~65535
If the protocol is BGP-ext, there can be two
additional conditions: <as-number> and
<peer-address>. <peer-address> is the IP
address of the peer
Tag of lsa after redistribution, range:
0~4294967295
Metric of LSA after redistribution. range:
0~16777214, default: the default metric of
the system
Metric-type of LSA after redistribution, value:
ext-1 or ext-2, default: ext-2
Name of the route map for redistributed by
the current protocol, 1~16 characters
tribution of routes of this protocol.
default value of TAG of type 5 LSA redistributed by routes of
this protocol.
the default value of the metric of the type 5 LSA redistributed
by routes of this protocol.
stores the default value of the metric-type of the type 5 LSA
redistributed by routes of this protocol.
cels the control over the route map of the redistribution of
routes of this protocol.
already been a redistribution of isis-1–2, then the redistribution
of isis-1 or isis-2 will take no effect. It is not recommended to
use the command redistribute isis-1–2 unless all the option
values of isis-1 and isis-2 after the redistribution are the same.
If there has already been a redistribution of isis-1 or isis-2 be-
fore the redistribution of isis-1–2, the previous redistribution