Heat Sink - HP Spectre x360 Maintenance And Service Manual

Heat sink

Description
Heat sink
IMPORTANT:
and replacement.
Before removing the heat sink, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. TouchPad (see
c. Fans (see
d. System board (see
Remove the heat sink:
1. Turn the system board over, and then remove the 3 Phillips M2.0×2.5-I screws securing the heat sink to
the system board (1).
2. Remove the heat sink (2).
Make special note of each screw and screw lock size and location during removal
Bottom cover on page
Battery on page
TouchPad on page
Fans on page 44).
System board on page
34), and then remove the following components:
35).
37).
46).
Spare part number
L37659-001
Heat sink 49