Fans - HP Spectre x360 Maintenance And Service Manual

3. Remove the solid-state drive by pulling it away from the socket (2).
Reverse this procedure to install the solid-state drive.

Fans

Description
Fan (left)
Fan (right)
IMPORTANT:
and replacement.
Before removing the fan, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the fan:
1. Disconnect the antenna cables (1)).
2. Release the ZIF connector (2), and then disconnect the fan cable (3).
3. Disconnect the IR sensor cable (4).
44 Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Bottom cover on page
Battery on page
34).
35).
Spare part number
L37660-001
L38013-001