Solid-State Drive - HP Spectre x360 Maintenance And Service Manual

Solid-state drive

Description
1-TB, 2280, PCIe3×4, NVMe solid-state drive with TLC
256-GB, M.2 2280, PCIe3×4, NVMe, SS solid-state drive with TLC
2-TB, 2280, PCIe3×4, NVMe solid-state drive with TLC
512-GB, M.2 2280, PCIe3×4, NVMe, SS solid-state drive with TLC
IMPORTANT:
replacement.
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the solid-state drive module:
1. Remove the metal cover on top of the solid-state drive module.
2. Remove the Phillips M2.0×3.0 screw that secures the solid-state drive module to the computer (1).
Make special note of each screw and screw lock size and location during removal and
Bottom cover on page
Battery on page
34).
35).
Spare part number
L37642-001
L37643-001
L37644-001
L37645-001
Solid-state drive 43