Inserting A Microsd Card Or A Nano Sim Card (Select Products Only) - HP Spectre x360 Maintenance And Service Manual

Inserting a microSD card or a nano SIM card (select products only)

To insert a microSD or a nano SIM card into the SIM card slot, follow these steps:
1. Position the computer display-side up on a flat surface.
2. Insert a small straightened paper clip into the card tray access hole.
3. Press in gently on the clip until the card tray is ejected. (1)
4. Remove the tray (2) from the computer and insert the card (3).
5. Replace the tray in the computer. Press in gently on the tray (4) until it is firmly seated.
CAUTION: Inserting a SIM card of the wrong size could damage the SIM card or cause the SIM card to become
stuck in the slot. The use of nano SIM card adapters is not recommended. To prevent damage to the nano SIM
card or the connectors, use minimal force when inserting a nano SIM card.
NOTE: Before purchasing a nano SIM card, follow these instructions to determine the correct nano SIM card
size for your computer:
1. Go to http://www.hp.com/support, and then search for your computer by product name or number.
2. Select Product Information.
3. Refer to the listed options to determine which card to purchase.
To insert a nano SIM card, follow these steps:
1. Position the computer display-side up on a flat surface.
2. Insert a small straightened paper clip into the card tray access hole.
3. Press in gently on the clip until the card tray is ejected (1) .
4. Remove the tray (2) from the computer and insert the card (3).
Inserting a microSD card or a nano SIM card (select products only) 17