Husky Altanium Neo5 User Manual page 88

v 1.0 — August 2018 Altanium Neo5
Output Power Limit — In the dialog box, enter the maximum percentage of output power
that will be supplied to heat the zones.
Slaved to Zone — In the dialog box, enter the zone number that the selected zone will be
slaved to. If the selected zones thermocouple fails, Neo5 will use the power output of the
zone that it is slaved to. This will let the selected zone function without an operating
thermocouple. Refer to Section 7.5.13.
Sensor Input — In the dialog box, enter the number of the thermocouple that is connected
to the zones. The match zone button will select the thermocouple with the same number as
the zone.
Page 78