Husky Altanium Neo5 User Manual page 149

User Guide
CAUTION!
Mechanical failure mode - attempting to remove a card when the upper and lower
heatsink mounting fasteners are not fully disengaged from the female threads on the
cabinet can result in catastrophic damage to the card.
2.
3.
Loosen the upper and lower slotted fasteners on the heat sink. These two fasteners are
captive so they will not fall into the system or get lost on the floor.
Slide a screwdriver between the silver post and the ledge on the cabinet and gently pry
the card out.
v 1.0 — August 2018 Altanium Neo5
Page 139