Setting Soak Timers - Husky Altanium Neo5 User Manual

Run Last Stage Indefinitely
Stage x Soak Timer
At Temp Window

11.1.1 Setting Soak Timers

At the end of each stage during staged startup or shutdown, when all the zones are at the
stage setpoint, they can be left to "soak" for a specified time before the next stage begins. Use
the Staging screen to change the soak time lengths.
NOTE:
NOTE:
1.
2.
3.
Page 114
Item
It is not necessary to assign a soak time to each stage. To avoid a delay between when
a stage has reached setpoint and before the following stage is activated, set the timer
to 00:00:00.
It is not necessary to select zones to set the soak timer.
On the Staging screen, touch
menu.
Touch the box to the right of the stage 1 soak timer.
Use the dialog box to set the soak time, then
v 1.0 — August 2018
If this setting is enabled, all zones in the last assigned stage will
not change to their normal setpoint once all zones have achieved
the stage setpoint and the soak timer has expired.
The time the zones stay "soak" at the stage setpoint before the
next stage begins.
The stage will be At Temperature when the setpoint is within the
At Temperature window.
on the Staged Startup button to show the drop down
Description
.
Altanium Neo5