Enable Security - Husky Altanium Neo5 User Manual

User Guide
5.
6.
7.
5.2.3

Enable Security

You must put a check mark in the Enable Security box to apply all the security settings. The
default is Enable Security. You can touch the box and remove the check mark. This will
disable all the security settings and all users will have access to all functions/screens.
Touch the box to the right of the function/screen name to show the dialog box.
Select a user role, then
The Users tab is greyed out because only the administrator can manage users. Refer to
Section 5.2.1.
Assign a user role for each function/screen in the remaining tabs on the Screen Security
screen.
When Operator is selected, the supervisor and administrator roles also have access to
the function/screen.
When Supervisor is selected, the operator cannot access that function/screen.
When Administrator is selected, the supervisor and operator cannot access that
function/screen.
v 1.0 — August 2018
.
Altanium Neo5
Page 33