Chapter 8
Diagnostics is a useful tool for troubleshooting problems with a mold or for verifying the
wiring integrity of a mold after maintenance has been performed. You can also use
diagnostics to analyze the thermal isolation between all the cavities in the mold.
8.1
Test Settings
NOTE:
Before you run a test you must enter in the test parameters in the Settings screen.
1.
Mold Diagnostics
The settings are set to their default values at the factory. The settings can be changed
if necessary. The steps that follow are not mandatory and only need to be done once,
unless additional changes are necessary in the future.
On the Home screen, select
v 1.0 — August 2018
Altanium Neo5
.
Page 89