Omron NX-series User Manual page 68

3 Option Boards
 Settings
The settings are as follows:
Setting
Item Setting
group
Memory CIO Enable
Settings for
CJ-series
Units
Size
(Num-
ber of
Words)
WR Enable
Size
(Num-
ber of
Words)
HR Enable
Size
(Num-
ber of
Words)
DM Enable
Size
(Num-
ber of
Words)
Refer to the NJ/NX-series CPU Unit Software User's Manual (Cat. No. W501) for the specifications of
memory used for CJ-series Units.
3 - 8
Description
Enable or disable the genera-
tion of CIO area type memory
used for CJ-series Units.
Specify the size of memory of
area type CIO.
Enable or disable the genera-
tion of WR area type memory
used for CJ-series Units.
Specify the size of memory of
area type WR.
Enable or disable the genera-
tion of HR area type memory
used for CJ-series Units.
Specify the size of memory of
area type HR.
Enable or disable the genera-
tion of DM area type memory
used for CJ-series Units.
Specify the size of memory of
area type DM.
NX-series NX1P2 CPU Unit Built-in I/O and Option Board User's Manual (W579)
Set value Default
Enable Disable When
down-
Disable
loaded to
CPU Unit
1 to 6,144 6,144 When
down-
loaded to
CPU Unit
Enable Disable When
down-
Disable
loaded to
CPU Unit
1 to 512 512 When
down-
loaded to
CPU Unit
Enable Disable When
down-
Disable
loaded to
CPU Unit
1 to 1,536 512 When
down-
loaded to
CPU Unit
Enable Disable When
down-
Disable
loaded to
CPU Unit
1 to 16,000 4,096 When
down-
loaded to
CPU Unit
Update Changes in
timing RUN mode
Not allowed.
Not allowed.
Not allowed.
Not allowed.
Not allowed.
Not allowed.
Not allowed.
Not allowed.