Parameter List - Danfoss MCA 122 Modbus TCP Operating Instructions Manual

Parameters
12-98 Interface Counters
Range:
4000 [0 - 4294967295 ] Read only. Advanced Interface
*

5.3 Parameter List

Parameter
8-0* General Settings
5 5
8-01 Control Site
8-02 Control Word Source
8-03 Control Word Timeout Time
8-04 Control Word Timeout Function
8-05 End-of-Timeout Function
8-06 Reset Control Word Timeout
8-1* Ctrl. Word Settings
8-10 Control Word Profile
8-13 Configurable Status Word STW
8-14 Configurable Control Word CTW
8-5* Digital/Bus
8-50 Coasting Select
8-51 Quick Stop Select
8-52 DC Brake Select
8-53 Start Select
8-54 Reversing Select
8-55 Set-up Select
8-56 Preset Reference Select
Table 5.2 Parameter Group 8-**
34
MCA 122 Modbus TCP
Function:
counters, from built-in switch, can be
used for low-level troubleshooting,
The parameter shows a sum of port
1+port 2.
Default value
[0] Digital and ctrl.word All set-ups
null
1.0 s
null
[1] Resume set-up
[0] Do not reset
[0] FC profile
[1] Profile default
[1] Profile default
[3] Logic OR
[3] Logic OR
[3] Logic OR
[3] Logic OR
[3] Logic OR
[3] Logic OR
[3] Logic OR
®
MG90P202 - VLT
12-99 Media Counters
Range:
0 [0 - 4294967295 ] Read only. Advanced Interface counters,
*
4-set-up Change during
operation
TRUE
All set-ups TRUE
1 set-up TRUE
1 set-up TRUE
1 set-up TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
is a protected Danfoss trademark
Function:
from built-in switch, can be used for
low-level troubleshooting, The
parameter shows a sum of port 1+port
2.
Conver- Type
sion index
- Uint8
- Uint8
-1 Uint32
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8