Table of Contents
Advertisement
2.
Carefully remove the LED Status Ring board (F) and place it on the right side of the
drive using the temporary placement holes.
Refer to the manual packaged with the drive for details on removing the LED Status
Ring board.
NOTICE: Do not remove the LED Status Ring board cable connector. Failure to comply could cause
erroneous operation and damage the drive.
Figure 14
Drive front view
YASKAWA ELECTRIC TOBP C730600 75B YASKAWA AC Drive Option PG-B3 Installation Manual
F
Figure 14 Remove the LED Status Ring Board
5 Installation Procedure
Temporary placement holes
A1000
25
Advertisement
Table of Contents
