YASKAWA PG-B3 Installation Manual page 14

5 Installation Procedure
Procedure A
n
This section describes the procedure for installing and wiring options on 1000-series drives.
Prepare the Drive for the Option
Before beginning the installation procedure:
1. Wire the drive and make the proper connections to drive terminals according to the manual
packaged with the drive.
2. Verify that the drive functions normally.
Refer to Figure 2
for reference in the installation procedure.
Figure 2
L
K
J
I
A – Insertion point for CN5
B – Option card
C – Included screws
D – Front cover
E – Digital operator
F – Terminal cover
G – Removable tabs for wire routing
14
for an exploded view of the drive with the option and related components
H
Figure 2 Drive Components with Option
YASKAWA ELECTRIC TOBP C730600 75B YASKAWA AC Drive Option PG-B3 Installation Manual
A
B
C
G
H – Ground wire
I – Drive grounding terminal (FE)
J – Connector CN5-A
(Not available for PG option installation.)
K – Connector CN5-B
L – Connector CN5-C
D
E
F