Table of Contents
Advertisement
Procedure B
n
This section describes the procedure for installing and wiring options on GA700, CR700,
and CH700 drives.
Prepare the Drive for the Option
Before beginning the installation procedure:
1. Wire the drive and make the proper connections to drive terminals according to the manual
packaged with the drive.
2. Verify that the drive functions normally.
Refer to
Figure 12
components for reference in the installation procedure.
Figure 12
I
H
G
A – Insertion point for CN5
connector
B – PG-B3 option
C – Included screws
D – Drive front cover
E – Keypad
YASKAWA ELECTRIC TOBP C730600 75B YASKAWA AC Drive Option PG-B3 Installation Manual
for an exploded view of the drive with the option and related
F
Figure 12 Drive Components with Option
5 Installation Procedure
A
B
C
F – LED Status Ring board
G – Connector CN5-A
(Not available for PG option installation.)
H – Connector CN5-B
I – Connector CN5-C
A1000
D
E
23
Advertisement
Table of Contents
