Acl - iBall Baton DWA-N150U Series Manual

4.9.4

ACL

Choose Security Settings > ACL, the page shown in the following figure appears. In this
page, you can permit the data packets from LAN or WAN to access the router. You can
configure the IP address for Access Control List (ACL). If ACL is enabled, only the
effective IP address in the ACL can access the router.
The following table describes the parameters and buttons of this page:
Field
Direction Select
LAN ACL Switch
IP Address
Services Allowed
Description
Select the router interface. You can select LAN or WAN. In
this example, LAN is selected.
Select it to enable or disable ACL function.
Enter the IP address of the specified interface. Only the IP
address that is in the same network segment with the IP
address of the specified interface can access the router.
You can choose the following services from LAN: Web,
Telnet, SSH, FTP, TFTP, SNMP, or PING. You can also
75