Qos - iBall Baton DWA-N150U Series Manual

Nat IP Mapping
NAT is short for Network Address Translation. The Network Address Translation Settings
window allows you to share one WAN IP address for multiple computers on your LAN.
Choose Advanced Settings > NAT > Nat IP Mapping, the page shown in the following
figure appears
Entries in this table allow you to configure one IP pool for specified source IP address
from LAN, so one packet whose source IP is in range of the specified address will select
one IP address from the pool for NAT.
4.7.3

QoS

Choose Advanced Settings > QoS to display the submenus. You can select QoS or
Traffic Shaping to do relevant settings.
59