iBall Baton DWA-N150U Series Manual page 28

Field
Local IP Address
Netmask
Unnumbered
Add
Modify
Click in the PPPoE mode, the page shown in the following figure appears. In this
page, you can configure parameters of this PPPoE PVC.
Description
When Fixed IP is selected, you should
enter the local IP address, remote IP
address and subnet mask.
When DHCP is selected, the router is a
DHCP client and the WAN IP address is
assigned by the remote DHCP server.
Enter the IP address of WAN interface
provided by your ISP.
Enter the subnet mask of the local IP
address.
Select this checkbox
unnumbered function.
After configuring the parameters of this page,
click it to add a new PVC into the Current
ATM VC Table.
Select a PVC from the Current ATM VC
Table, then modify the parameters of this
PVC. After setting, click it to apply the
settings of this PVC.
Click it, the PPP Interface-Modify appears.
You can modify the PVCs' parameters.
23
to enable IP