iBall Baton DWA-N150U Series Manual page 61

Field
WAN Port Choose the access port on the WAN.
LAN Port Enter the port number of the specified service type.
Enter the IP address of the virtual server. It is in the same
LAN IP Address
network segment with LAN IP address of the router.
ALG
Choose Advanced Settings > NAT > ALG, and the page shown in the following figure
appears. Choose the NAT ALG and Pass-Through options, and then click Apply
Changes.
NAT Exclude IP
Choose Advanced Settings> NAT > NAT Exclude IP, and the page shown in the
following figure appears.
In the page, you can configure some source IP addresses which use the purge route
mode when accessing internet through the specified interface.
Description
56