iBall Baton DWA-N150U Series Manual page 60

Virtual Server
Choose Advanced Settings > NAT > Virtual Service, and the page shown in the following
figure appears.
The following table describes the parameters of this page.
Field
You can select the common service type, for example,
AUTH, DNS or FTP. You can also define a service name.
Service Type
Choose the transport layer protocol that the service type
Protocol
uses. You can choose TCP or UDP.
WAN Setting You can choose Interface or IP Address.
WAN Interface Choose the WAN interface that will apply virtual server.
Description
If you select Usual Service Name, the corresponding
parameter has the default settings.
If you select User-defined Service Name, you need to
enter the corresponding parameters.
55