iBall Baton DWA-N150U Series Manual page 37

The following table describes the parameters of this page:
Field
DHCP Mode
IP Pool Range
Show Client
Default Gateway
Max Lease Time
Domain Name
DNS Servers
Set VendorClass
IP Range
Click Show Client in the DHCP Mode page, the page shown in the following figure
appears. You can view the IP address assigned to each DHCP client.
Description
If set to DHCP Server, the router can assign IP
addresses, IP default gateway and DNS Servers to
the host in Windows95, Windows NT and other
operation systems that support the DHCP client.
It specifies the first and the last IP address in the IP
address pool. The router assigns the IP address in
the IP pool range to the host.
Click it, the Active DHCP Client Table appears. It
shows IP addresses assigned to clients.
Enter the default gateway of the IP address pool.
The lease time determines the period that the host
retains the assigned IP addresses before the IP
addresses change.
Enter the domain name if you know. If you leave this
blank, the domain name obtained by DHCP from the
ISP is used. You must enter host name (system
name) on each individual PC. The domain name can
be assigned from the router through the DHCP
server.
You can configure the DNS server IP addresses for
DNS Relay.
Click it, the Device IP Range Table page appears.
You can configure the IP address range based on the
device type.
32