Table of Contents
Advertisement
Field
Set DNS
Select it, enter the IP addresses of the primary and secondary
Manually
DNS server.
Apply Changes
Click it to save the settings of this page.
Reset Selected
Click it to start configuring the parameters in this page.
IPv6 DNS
Choose Access Management > DNS > IPv6 DNS, and the page shown in the following
figure appears.
4.8.5
DynDNS
Choose Access Management > DynDNS, and the page shown in the following figure
appears. This page is used to configure the dynamic DNS address. You can add or
remove to configure dynamic DNS.
Description
Figure 7
68
Advertisement
Table of Contents
