iBall Baton DWA-N150U Series Manual page 52

Field
dropdown list.
PreambleType
Select whether the modem broadcasts SSID or not. You can
select Enable or Disable.
Broadcast SSID
Wireless isolation. Select Enable, the wireless clients that
Relay Blocking
are connected to the modem cannot intercommunication.
Ethernet to Wireless Whether the wireless network can communicate with the
Blocking Ethernet network or not.
Enable or disable it. Multicast to unicast conversion to
Wifi Multicast to
provide reliable transmission and reduce the loss and delay,
Unicast
which is necessary for multimedia applications.
Enable or disable it. Aggregation is a feature of the 802.11n
Aggregation wireless LAN standards that increases throughput by
sending two or more data framesin a single transmission.
Enable or disable it. GI is guard interval that is used to
ensure that distinct transmissions do not interfere with one
another. Short GI is 0.4 s guard interval. The short guard
Short GI interval results in a higher packet error rate when the delay
spread of the channel exceed the guard interval and/or if
timing synchronization between the transmitter and receiver
is not precise.
Enable or disable it. WMM is a Wi-Fi Alliance interoperability
certification, based on the IEEE802.11e standard. It
provides basic Quality of service (QoS) features to IEEE
WMM
802.11 networks. WMM prioritizes traffic according to four
Access Categories (AC) - voice, video, best effort, and
background. However, it does not provide guaranteed
Description
Long Preamble: It means this card always use long
preamble.
Short Preamble: It means this card can support short
preamble capability.
Select Enable, the SSID can be detected.
Select Disable to hide SSID, the wireless clients cannot
find the SSID. You need to enter the SSID and password
of the wireless network manually.
47