Table of Contents
Advertisement
Field
modem must have the same SSID.
Channel Width
You can select 20MHZ.
Only when choose 20MHZ for Channel Width, you
Control Sideband
can set this parameter. You can choose Upper or
Lower from the drop-down list.
A channel is the radio frequency used by
802.11b/g/n wireless devices. You may have a
choice of channels (for your region) and you
should use a different channel from an adjacent
Channel Number
AP to reduce the interference. Interference and
degrading performance occurs when radio signal
from different APs overlap.
Choose a channel from the drop-down list box.
Choose the transmission power of the radio
Radio Power
signal. It is recommended to leave the default
setting. The default setting is 100%.
Click it to view the information of the wireless
Show Active Clients
clients that are connected to the modem.
Click it to apply the settings temporarily. If you
Apply Changes
want to save the settings of this page
permanently, click Save in the lower left corner.
Description
40
Advertisement
Table of Contents
