Table of Contents
Advertisement
Field
Select it to enable SNMP function. You need to
Enable SNMP
enable SNMP, then you can configure the
parameters of this page.
Enter the trap IP address. The trap information is
Trap IP Address
sent to the corresponding host.
Community name
The network administrators must use this password
(Read-only)
to read the information of this router.
Community name
The network administrators must use this password
(Read-Write)
to configure the information of the router.
4.8.4
DNS
DNS
Choose Access Management > DNS > DNS, and the page shown in the following figure
appears.
The following table describes the parameters and buttons of this page:
Field
Select it, the router accepts the first received DNS assignment
Set DNS
from one of the PPPoA, PPPoE or MER enabled PVC(s) during
Automatically
the connection establishment.
Description
Description
67
Advertisement
Table of Contents
