Cabling The Network Ports - Allied Telesis AT-x220-28GS Installation Manual

Cabling the Network Ports

Observe the following guidelines before installing SFP transceivers on the
switch.
The transceivers are hot-swappable. You can install them while the

switch is powered on.
For a list of supported transceivers, refer to the product data sheet

on the Allied Telesis web site.
The operational specifications and fiber optic cable requirements of

the transceivers are provided in the documents included with the
devices.
You should install a transceiver before connecting its fiber optic

cable.
Unnecessary removal and insertion of a transceiver can lead to

premature failure.
Caution
Transceivers can be damaged by static electricity. Be sure to
observe all standard electrostatic discharge (ESD) precautions, such
as wearing an anti-static wrist strap, to avoid damaging the devices.
E92
AT-x220-28GS Switch Installation Guide
39