Turning The Dash Cam On; Power Button; Restarting The Dash Cam - Mio MiVue 730 Series User Manual

Turning the dash cam on

Complete the installation according to the instructions in the "Using your dash cam
in a vehicle" section. Once the vehicle engine is started, the dash cam automatically
turns on. The System indicator glows in green when the dash cam is powered.

Power button

Press and hold the Power button for 2 seconds to manually turn the dash cam on
and off.

Restarting the dash cam

Occasionally, you may need to perform a hardware reset when the dash cam stops
responding or if it appears to be "frozen" or unresponsive. To restart the dash cam,
press and hold the Power button until the system powers off; press the Power button
again to turn the dash cam on.
If the system does not shut down by keeping the Power button pressed, you can
force it to shut down by inserting a small rod (such as a straightened paperclip) into
the Shutdown button on the device.
8