Turning The Dash Cam On; Power Button; Shutting Down The Dash Cam - Mio 5415N5780005 User Manual

Turning the dash cam on

Complete the installation according to the instructions in the "Using your dash cam
in a vehicle" section. Once the vehicle engine is started, the dash cam automatically
turns on. The System indicator glows in green when the dash cam is powered.

Power button

Press and hold the Power button for 2 seconds to manually turn the dash cam on
and off.

Shutting down the dash cam

Occasionally, you may need to perform a hardware reset when the dash cam stops
responding or if it appears to be "frozen" or unresponsive. To turn off the dash cam,
press and hold the Power button until the system shuts down.
If the system does not turn off by keeping the Power button pressed, you can force
it to shut down by inserting a small rod (such as a straightened paper clip) into the
Shutdown button of the device.
9