Mio MiVue 730 Series User Manual page 15

WIFI function is disabled by default. You can enable WIFI by selecting
On. Once enabled, the WIFI setting screen displays the SSID and password of the
dash cam.
Follow the steps to set up the wireless network connection between the dash cam
and your smartphone:
1. Enable the wireless network function of the smartphone.
2. On your smartphone, open the MiVue app and follow the on-screen instructions
to set up the connection.
The next time you use your smartphone to connect to the dash cam, you will not
be prompted to enter the password again unless you reset your phone to the
factory default settings.
3. You can check the WIFI connection status by the WIFI icon on the dash cam.
The dash cam is connected to the smartphone and paired with the
MiVue app.
The dash cam is not connected to the smartphone.
The dash cam is connected to the smartphone but not paired with the
MiVue app yet.
4. On your smartphone, open the MiVue app and keep it awake. You can now
transfer videos by pressing the Event button.
14
> WIFI >