Operating Basics; Turning The Dash Cam On; Restarting The Dash Cam; System Icons - Mio N548 User Manual

Operating basics

Turning the dash cam on

Complete the installation according to the instructions in the "Using your dash cam
in a vehicle" section. Once the vehicle engine is started, the dash cam automatically
turns on.

Restarting the dash cam

Occasionally, you may need to perform a hardware reset when the dash cam stops
responding or if it appears to be "frozen" or unresponsive. To restart the dash cam,
press and hold the Power button until the system is shut down; press the Power
button again to turn the dash cam on.
If the system does not shut down by keeping
the Power button pressed, you can force it to
shut down by inserting a small rod (such as
a straightened paperclip) into the Shutdown
button on the top of the device.

System icons

Various system icons on the status bar at the top of the screen provide the status
information of your device. The icons displayed will vary depending on your device
model and state.
1
7
2 3 4 5 6
Recording indicator
1
WIFI status
2
Time display
3
Microphone status
4
GPS signal
5
Battery status
6
Your current speed
7
11