Turning The Dash Cam On; Shutting Down The Dash Cam; System Icons - Mio MiVue C560 Series User Manual

Turning the dash cam on

Complete the installation according to the instructions in the "Using your dash cam
in a vehicle" section. Once the vehicle engine is started, the dash cam automatically
turns on.
Note: Press and hold the Power button for 2 seconds to manually turn the dash cam on and off.

Shutting down the dash cam

Occasionally, you may need to perform a hardware reset when the dash cam stops
responding or if it appears to be "frozen" or unresponsive. To turn off the dash cam,
press and hold the Power button until the system shuts down.
If the system does not turn off by keeping the Power button
pressed, you can force it to shut down by inserting a small
rod (such as a straightened paper clip) into the Shutdown
button of the device.

System icons

Various system icons on the status bar at the top of the screen provide the status
information of your device. The displayed icons will vary depending on your device
model and state.
1 2 3 4
1
2
3
4
5
* For selected models only.
5
Recording indicator
Time display
Microphone status
GPS signal*
Current GPS car speed*
9