When the Parking mode detection is enabled, the system will enter Parking mode
when you:
Disconnect the device's power (for example, when the vehicle engine is stopped
l
or the power cable is disconnected) or when the car stops moving for about 5
minutes.
Note: The feature is triggered by the G sensor of the device. You can change the configuration
by selecting
Press
to manually start Parking mode while continuous recording is in
l
progress.
The Parking indicator flashes in red when Parking recording is in progress.To stop
Parking mode and resume continuous recording, press
detected and recorded during Parking mode, you will be asked to playback the
video when you stop Parking mode.
The parking recordings can be found in the "Parking" category for file playback.
Camera mode
The dash cam allows you to take a photo: press
The photos can be found in the "Photo" category for file playback.
Playback mode
To select a video or photo for playback:
1. Press
> File Playback.
2. Select the desired type.
3. Press
/
start playback.
> Parking Mode > Auto Entry.
to select the desired file from the list and then press
> Camera >
12
. If movements are
.
to