Mio MiVue 730 Series User Manual page 17

automatic triggering of the parking recording when the dash cam is in Parking
mode.
Video Recording
l
Changes the settings of recording, including:
Video Clip Length: Sets the length of each video clip for a continuous
l
recording (1 min, 3 min or 5 min).
WDR: Enables the WDR (Wide Dynamic Range) function to improve the dash
l
cam's image quality under high-contrast lighting conditions.
EV: Sets the exposure level (-1 – +1) to adjust the brightness of the image.
l
The default setting is 0.
Frequency: Sets the frequency to match the flicker frequency of the local
l
power supply when recording.
G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High)
l
of the G sensor that allows automatic triggering of the event recording while
continuous recording is in progress.
Stamps: Sets the information (Coordinates or G-Sensor) that will be
l
displayed on the recorded video.
Speed stamp: Displays the driving speed on the recorded video.
l
Text stamp: Displays customisable text information.
l
System
l
Allows you to change the system settings of the device.
Satellites: Displays the status of the GPS/GLONASS signal reception. You
l
can press
the need arises.
Date/Time: Sets the system date and time.
l
System Sound: Enables or disables system notification sounds.
l
and then select GPS or GLONASS for better signal reception if
16