Enabling The Ipv6 Bgp Orf Capability - H3C S5800 Series Configuration Manual

To do...
Enter system view
Enter BGP view
Enter IPv6 address family
view
Enable route refresh
Perform manual soft-reset
Follow these steps to perform manual soft reset:
To do...
Enter system view
Enter BGP view
Enter IPv6 address family view
Save all routes from an IPv6
peer/peer group, not letting them
go through the inbound policy
Return to user view
Soft-reset BGP connections
manually
If the peer keep-all-routes command is used, all routes from the peer/peer group will be saved
regardless of whether the filtering policy is available. These routes will be used to generate IPv6 BGP
routes after soft-reset is performed.

Enabling the IPv6 BGP ORF Capability

The BGP Outbound Route Filter (ORF) feature allows a BGP speaker to send its BGP peer a set of
ORFs through route-refresh messages. The peer then applies the ORFs, in addition to its local routing
policies (if any), to filter updates to the BGP speaker, thus reducing the number of exchanged update
messages and saving network resources.
Use the command...
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name | ipv6-address }
capability-advertise route-refresh
Use the command...
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name | ipv6-address }
keep-all-routes
return
refresh bgp ipv6 { all | ipv6-address | group
ipv6-group-name | external | internal } { export
| import }
11-16
Remarks
—
—
—
Optional
Enabled by default.
Remarks
—
—
—
Optional
Not saved by default.
Required