Displaying And Maintaining Ipv6 Bgp; Displaying Bgp - H3C S5800 Series Configuration Manual

In general, since the route reflector forwards routing information between clients, it is not required
to make clients of a route reflector fully meshed. If clients are fully meshed, it is recommended to
disable route reflection between clients to reduce routing costs.
If a cluster has multiple route reflectors, you need to specify the same cluster ID for these route
reflectors to avoid routing loops.

Displaying and Maintaining IPv6 BGP

Displaying BGP

To do...
Display IPv6 BGP peer group
information
Display IPv6 BGP advertised
routing information
Display IPv6 BGP AS path
information
Display IPv6 BGP peer/peer group
information
Display the prefix entries in the
ORF information of the specified
BGP peer
Display IPv6 BGP routing table
information
Display IPv6 BGP routing
information matching an AS path
ACL
Display IPv6 BGP routing
information with the specified
community attribute
Display IPv6 BGP routing
information matching an IPv6 BGP
community list
Use the command...
display bgp ipv6 group [ ipv6-group-name ]
display bgp ipv6 network
display bgp ipv6 paths [ as-regular-expression ]
display bgp ipv6 peer [ group-name log-info |
ipv4-address verbose | ipv6-address { log-info |
verbose } | verbose ]
display bgp ipv6 peer { ip-address | ipv6-address }
received ipv6-prefix
display bgp ipv6 routing-table [ ipv6-address
prefix-length ]
display bgp ipv6 routing-table as-path-acl
as-path-acl-number
display bgp ipv6 routing-table community
[ aa:nn<1-13> ] [ no-advertise | no-export |
no-export-subconfed ]* [ whole-match ]
display bgp ipv6 routing-table community-list
{ basic-community-list-number [ whole-match ] |
adv-community-list-number }&<1-16>
11-22
Remarks
Available in
any view