Clearing Learned Functions - Yamaha DSP-A1 Owner's Manual

CLEARING LEARNED FUNCTIONS

To Clear a Learned Function
1
To clear a learned key function, press the LEARN button
using the point of a mechanical pencil, etc.
To clear a macro you made, press the MACRO button.
CLEAR
2
Press and hold the CLEAR button using the point of a
mechanical pencil, etc.
3
Holding the CLEAR button pressed, press and hold the
key whose function you want to clear until the indicator
flashes 3 times.
CD
To clear two or more functions sequentially, do not
release the CLEAR button pressed, and repeat this step.
Note
If you clear a learned function of a key, the originally preset
function of the key is restored (except the keys which are
originally preset with no function.)
72
or
TRANSMIT
/LEARN
LEARN MACRO
Flashes slowly.
CLEAR LEARN MACRO
TRANSMIT
/LEARN
Flashes.
To Clear All Learned Functions
1
Select the kind of key functions all of which you want to
clear by using the MACRO switch on the side panel of
the remote control transmitter.
SLOW
OFF: Select this position if you want to clear all of the
learned functions except macros.
QUICK: Select this position if you want to clear all of the
macros you made.
SLOW: Select this position if you want to clear all of the
learned functions including macros.
2
Press the CLEAR button using the point of a
mechanical pencil, etc.
CLEAR LEARN MACRO
* If one of the following operation is made after you press
the CLEAR button, the TRANSMIT/LEARN indicator
flashes rapidly and the current mode is canceled. If this
occurs, press the CLEAR button again.
•
MACRO switch is switched to another position.
•
Another key is pressed.
•
There is no operation for about 30 seconds.
3
Press and hold the CLEAR button again. While holding
the CLEAR button pressed, press and hold the
MASTER VOLUME
until the indicator flashes 7 times.
MUTE
MACRO
QUICK
OFF
TRANSMIT
/LEARN
Flashes slowly.
and keys simultaneously
TRANSMIT
/LEARN
Flashes.