Clearing learned functions
To Clear a Learned Function
To clear a learned key function, press the LEARN button
using a ball-point pen or similar object.
To clear a macro you made, press the MACRO button.
Press and hold the CLEAR button using a ball-point pen
or similar object.
Holding the CLEAR button pressed, press and hold the
key whose function you want to clear until the indicator
flashes 3 times.
To clear two or more functions sequentially, do not
release the CLEAR button, and repeat this step.
If you clear a learned function of a key, the key is restored by
the originally preset function. (except the keys which are
originally preset with no function.)
To Clear All Learned Functions
Select the kind of key functions all of which you want to
clear by using the MACRO switch on the side panel of
the remote controller.
Select this position if you want to clear all of the
learned functions except macros.
QUICK: Select this position if you want to clear all of the
macros you made.
SLOW: Select this position if you want to clear all of the
learned functions including macros.
Press the CLEAR button using a ball-point pen or
* If one of the following is made after you press the CLEAR
button, the TRANSMIT/LEARN indicator flashes rapidly
and the current mode is canceled. Press the CLEAR
MACRO switch is switched to another position.
Another key is pressed.
There is no operation for about 30 seconds.
Press and hold the CLEAR button again. While holding
down the CLEAR button, press and hold the MASTER
indicator flashes 7 times.
keys simultaneously until the