Yamaha DSP-A1 Owner's Manual page 48

NATURAL SOUND
STANDBY/ON
PHONES
3
Select the desired program that is suitable for the source.
When operating on the front panel:
* The name of the selected program lights up on the display panel and the monitor screen.
4
If desired, adjust the output level of each speaker. (For details, refer to the corresponding descriptions on pages 48 and 49.)
If desired, you can create your own sound field taste. (For details, refer to pages 56 to 60.)
Notes
Program selection can be made to individual input sources. Once you select a program, it is linked with the input source selected
at that time. So, when you select the same input source next time, the same program is automatically called.
If you prefer to cancel the DSP, press the EFFECT button. The sound will be the normal 2-channel stereo without surround
sound effect.
When a monaural sound source is played with the program DOLBY/DTS SURROUND, no sound is heard from the main
speakers and the rear speakers. Sound is heard only from the center speaker. However, if the function "1A. CENTER SP" in the
SET MENU mode is set in the "NONE" position, the main speakers output the sound of the center channel.
When this unit's Dolby Pro Logic Surround decoder, Dolby Digital decoder or DTS decoder is used, if the main-source sound is
considerably altered by overadjustment of the BASS or TREBLE control, the relationship between the center and rear channels
may produce an unnatural effect.
When a source of signals input to the EXTERNAL DECODER INPUT terminals of this unit is selected, the DSP cannot be used
and the EFFECT button also will not function.
46
CINEMA DSP 7ch
AV AMPLIFIER DSP A1
TV/DBS LD
VCR 1 MD/TAPE 1
DIGITAL
VCR 2 TUNER
PRO LOGIC
DVD/VCR 3 CD
DSP
V-AUX PHONO
DIGITAL SOURCE
TAPE 2 MON
AC 3 DTS PCM SLEEP
SET MENU NEXT PROGRAM EFFECT INPUT MODE
BASS BASS TREBLE BALANCE REC OUT
EXTENSION
SOURCE MD/TAPE 1
0 0 0
l l l l LD CD
l l
VCR 1 TV/DBS
2 2 2 2 2 2
VCR 2
3 3 3 3 3 3
DVD/VCR 3
4 4 4 4 4 4
VIDEO AUX
5 5 5 5 L 5 5 R
3
PROGRAM
Press once or more.
PRO LOGIC
DSP
VOLUME
INPUT SELECTOR
l6
20
l2
28 8
40 4
TAPE 2 MON 60 2
/EXT. DECODER
0
–dB
VIDEO AUX
When operating on the remote control transmitter:
a)
b) Select a desired subprogram by pressing the same
DSP program selector key once or more, or by
pressing the +/– keys.
Subprogram name
PRESET A/B/C/D/E
HALL 1 HALL 2 CHURCH
1 2
JAZZ ROCK ENTER-
3
CLUB CONCERT TAINMENT
4 5
CONCERT CONCERT
VIDEO 1 VIDEO 2 THEATER
7 8
MOVIE MOVIE
THEATER 1 THEATER 2 SURROUND
10 11
LEVEL
PARAMETER
TEST
SET MENU
SLEEP ON SCREEN
HALL 1 HALL 2
CHURCH
1 2 3
JAZZ ROCK ENTER-
CLUB CONCERT TAINMENT
4 5 6
CONCERT CONCERT TV
VIDEO 1 VIDEO 2 THEATER
7 8 9
/ DTS
MOVIE MOVIE
SURROUND
THEATER 1 THEATER 2
12
10 11
TV/DBS LD
VCR 1 MD/TAPE 1
VCR 2 TUNER
DVD/VCR 3 CD
V-AUX PHONO
Program name
LD
TV/DBS
VCR 2
C
DVD/VCR 3
V-AUX
/EXT. DECODER
3 TAPE 2 MON
6 PHONO
TV
9 EFFECT
/ DTS
ON/OFF
12
3