Doosan D35S-5 Service Manual page 342

1. Generated errors during updating
This is the message shown when error is occurred during Update.
Check if the drive of SD card is found. Run the Update function again.
2. When the target drive for G-scan Update cannot be found
This is the message shown when the drive installed with G-scan S/W cannot be found.
• When the SD card installed with G-scan is not connected to the PC through the Reader
→ Connect the SD card and retry.
• Even the SD card is connected to the PC through the Reader, G-scan SD card is accidentally formatted or
because it is a new one
→ Using "Recovery" function, recover the Data and retry.
D439E Service Manual
<Figure 7: Update Error Message>
<Figure 8: Update Drive Found Message>
340 5. Service Tool