Doosan D35S-5 Service Manual page 283

Left Zone of "Actuation Test" Screen:
You can check the list for actuation test. Move the scroll bar by using the stylus pen or
button to select.
Right Zone of "Actuation Test" Screen:
You can check the Duration, Test Condition and Test Result.
Bottom zone of "Actuation Test" screen
How to execute the Actuation Test
1. Select the Actuator for Actuation Test
At the left zone of "Actuation Test" screen, select a item directly using stylus pen on the touch screen or
move the cursor using
2. Check Actuation Test condition and set vehicle
After checking the "Duration" and "Condition" at the right zone of "Actuation Test" screen, set the vehicle
accordingly.
3. Start Actuation Test
Select
4. Check the Actuation Test result
Test result (Failure or Success) will be show at the right zone of the "Actuation Test" screen.
5. Stop the Actuation Test
When duration is fixed
When duration is not fixted
NOTE : Test could be finished when
D439E Service Manual
Starts the test for the selected item.
Finishes the test for selected item.
Changes to the Current Data, DTC, ECU Info, or Vehicle S/W management.
, buttons.
or button to start the test.
Test will be finished when duration is over automatically.
After checking the result, select
the test.
or selected, although duration is fixed
281
or to finish
5. Service Tool